16 Roll Wet Wipes Machine with Dual Lid Applicator

16 Roll Wet Wipes Machine with Dual Lid Applicator is a high-speed automatic wet wipes production line that integrates nonwoven fabric feeding, folding, liquid dosing, cutting, stacking, packaging, and lid application, helping manufacturers maintain continuous production while reducing packaging-stage bottlenecks.

16 Roll Structure for Continuous Production

The 16-roll configuration is designed for large-volume wet wipes manufacturing. The line can integrate multiple fabric feeding channels with automatic tension control, folding, quantitative liquid application, cutting, and stacking. Depending on the material and product specification, wet wipes can be produced in different sizes and pack counts.

A typical production sequence includes nonwoven fabric unwinding, folding, liquid dosing, cutting, counting and stacking, followed by film feeding, punching, labeling and pouch packaging. Similar 16-lane systems on the market use full-servo and PLC control, with some configurations reaching around 5,600–8,800 wipes per minute at the converting stage.

Dual Lid Applicator Solves the Packaging Bottleneck

For high-speed lines, the lid application section can become a limiting point if its processing capacity is lower than the upstream packaging speed. This 16-roll wet wipes machine therefore uses a dual lid applicator system with two synchronized robotic units.

The robots can pick, position, and apply plastic lids automatically. Vision-based positioning helps compensate for package-position variation and maintain consistent lid placement. Commercial lid applicator systems commonly use servo-controlled mechanisms and vision inspection, with positioning accuracy around ±1–1.5 mm depending on configuration.

The dual-robot arrangement is designed to distribute lid-applying operations between two working units, supporting a target packaging speed of approximately 90–120+ packs/min under suitable product and material conditions. The actual output should be determined by wipe size, sheets per pack, film specifications, and packaging configuration rather than by machine speed alone.

Overall, the 16 Roll Wet Wipes Machine with Dual Lid Applicator is built around one practical objective: keeping high-speed wet wipes production synchronized from raw material feeding through final lid application, with automation focused on reducing interruptions and maintaining consistent package quality.